18 Differences Between GLD-1 and GLD-2 Mesh Making Machine
Normal Speed
30% Higher Production
Drawing Roller, teeth Bending Strength: Norma
Drawing Roller, teeth Bending Strength:High
Manual Control
Length of Twist not Adjustable
PLC Control
Length of Twist Adjustable
Top Pressing Net Device: No
Top Pressing Net Device: Yes
Power: 22KW
Power: 30KW
Trawler Base: One Gear Rack
Trawler Base: Two Gear Rack( For larger diameter of wire)
Size: 7200x1400x2400mm
Size: 7200x1400x2400mm
Max:7200x1400x2400mm
Adjustment Device on Rack Drive Frame: Frequent Adjustment Needed
No Adjustment Device on Rack Drive Frame
No Need of Adjustment
Maximum Width: 4300 mm
Maximum Width: 4300 mm
Max:5700mm
Small Gear Box: High Temp Under Constant Running, Affect service life
Large Gear Box: Normal Temp Under Constant Running, Optimized
Material: Ordinary Cast Iron
Material: Ductile Iron
User experience: Need Adjustment, Hard to use
User experience: Less Adjustment, Easy to use
Assemble: Scattered Parts
High Error
Assemble: Integrated Design
More Accurate
Spring-winding Machine: 4 spring rods
Spring-winding Machine: 6 spring rods
Maximum Wire Diameter: 2.7mm/3.0/3.4mm
Maximum Wire Diameter: 3.0mm/3.4/4.0mm
Tension Adjustment: Manual
Tension Adjustment: PLC Control
Integrality of Trawler Base: Welding of Ordinary Rectangular Steel Pipe
Spring-winding Machine: ManualControl
Spring-winding Machine: PLC Control
GLD-1 Spirial coiling machine
Manual Control
Spring Rod: 4
Spring loading method: Spring Rod needs to be removed
Counting System: No
Teeth exchange: Needed. Different spring need different teeth.
Max. length of wire-coiling: 1200 mm
Layer of wire-coiling: 6 Max.
Max.zinc-coated wire m/m: 4 Max.
Max.diameter after coating 5mm
Motor power: 1.5kw
system ,weight:0.5ton
GLD-2 Spirial coiling machine
PLC Control
Spring Rod: 6
Spring loading method: Spring Rod do not need to be removed
Counting System: Yes
Teeth exchange: Not Needed. Change method controlled by PLC.
Max. length of wire-coiling: 1200 mm
Layer of wire-coiling: 6 Max.
Max.zinc-coated wire m/m: 4 Max.
Max.diameter after coating 5mm
Motor power: 1.5kw
weight:0.5ton
GLD-1 Netting roll winding machin
Max.netting length:more then 150M
Speed of winding roller: nonpolar Power:1.5kw
Width:4500mm
Weight:0.8ton
Consisting of netting roll stand.
Working width: - 4.5Mtr. Width
Reverse & forward movement of netting should be possible.
Roller pressure should bepneumatically controlled.
GLD-2 Netting roll winding machine
Max.netting length:more then 150M
Speed of winding roller: nonpolar Power:1.5kw
Width:4500mm
Weight:0.8ton
Consisting of netting roll stand.
Working width: - 4.5Mtr. Width.
Reverse & forward movement of netting should be possible.
Roller pressure should bepneumatically controlled.